Your 1967-1981 Camaro's J-nuts on the front leaf spring cup are constantly exposed to adverse weather conditions, meaning they usually end up so rusted that the spring mount bolts will strip out the threads on the bolt, or even break the…
Reproduction of the original and complete rear leaf spring installation kit designed for use on 1970-81 various GM vehicles equipped with multi-leaf rear springs including 1970-81 Camaro, Firebird, 1975-79 GM X-body models as listed below…
Includes Washers & Cups
Includes Correct Style Bolts with Castle Nut & Cotter Pin
Same as 3429116 but Includes 2 Additional Spring Cups Used in the Trailing Arms
…
Reproduction of the original rear leaf spring shackle kit for 1964-73 Mustang and various other Ford and Mercury models. This rear shackle kit includes two piece shackle, four rubber bushings and two nuts. Each vehicle requires 2 shackles…
Polyurethane rear spring mounting kit with 8" long bolts. 2" Longer than stock bolt allows for adjustment of rear ride height. Includes 2 Spring Cups, Additional Spring Cups Available Part 1009151.
…
Each leaf spring installation set comes complete with rear shackles, U-bolts, T-bolts, upper and lower spring pads, spring eye bolts, and clips and screws for mounting. The shackle sets include the correct plates, bushings, bolts and nuts…
Improve your Corvette’s stance and cornering ability with this complete C4 lowering kit, engineered to drop ride height by approximately 1 inch without sacrificing comfort or drivability. Designed specifically…
Restoration Correct Show Correct Complete Four Piece Kit With Both Uppers And Lowers These Insolate The Leaf Spring From The Axle Sold As A Set Of Four Is your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980 and 1981…
315 lbs Rate For Small Block Engines With Standard Suspension
Composite monospring restores lost ride height, eliminates leaf spring squeaking, and provides a smooth, comfortable ride without sacrificing performance, and best of…
Includes Washers & Cups
Includes Correct Style Bolts with Castle Nut & Cotter Pin
Includes 2 Spring Cups, Additional Spring Cups Available Part 1009151
…
Sets come complete with rear shackles, U-bolts, upper and lower spring pads, spring eye bolts, and clips and screws for mounting. The 1967-70 shackle sets include the correct plates, bushings, bolts and nuts for authenticity. Sets are…
315 lbs Rate For Small Block Engines With Standard Suspension
Composite monospring restores lost ride height, eliminates leaf spring squeaking, and provides a smooth, comfortable ride without sacrificing performance, and best of…
355 lbs For Corvettes With Hi-Performance Suspension
Composite monospring restores lost ride height, eliminates leaf spring squeaking, and provides a smooth, comfortable ride without sacrificing performance, and best of all - it…
315 lbs Rate For Small Block Engines With Standard Suspension
Composite monospring restores lost ride height, eliminates leaf spring squeaking, and provides a smooth, comfortable ride without sacrificing performance, and best of…
Reproduction of Original Complete leaf spring installation kit for mono-leaf or multi-leaf springs. Kits include rear shackle kits, upper and lower spring pads, spring front eye bolts and nuts, front spring eye bracket bolts and clip nuts…
Our rear leaf spring shackle kit includes the metal shackles with hardware and all rear of leaf spring bushings. Two kits required per car. Made in the usa!
…
A two-piece rear spring mount and slotted castle nut set designed for 1963-1982 Chevrolet Corvette rear suspension. This assembly secures the lower ball joint and rear spring mount, restoring proper alignment and improving safety…
The spring has a steel-gray painted finish to closely resemble the original in your Mustang. This shackle kit features 9/16" rubber bushings. This crucial component of your suspension is a direct-fit replacement that will restore a…
Our steel springs are manufactured to exceed OEM specifications and include the rubber liners for no-squeak travel. Replace that worn out, dangerous spring today.
When changing real springs or spring bolts, the stack up on the spring and…
Upgrade To Firmer/Longer Life Polyurethane Cushions
Includes Replacement Style Bolts with Nylon Nut
Includes 2 Spring Cups, Additional Spring Cups Available Part 1009151
…
The "Chinook" All Weather cover provides all season indoor and outdoor protection for your vehicle. This nearly impenetrable multi-layer fabric is fleece lined to protect fine automotive finishes and to ensure your vehicle’s surface…
The "True North" provides superior protection against all weather conditions. The material is a special woven polyester fabric coated with a thick silver reflective urethane layer on the outside. It will not only keep…
Polyurethane rear spring mounting kit with 8" long bolts. 2" Longer than stock bolt allows for adjustment of rear ride height. Includes 2 Spring Cups, Additional Spring Cups Available Part 1009151.
…
The "Toque" is an entry level car cover made from a non-abrasive, spun-bond material that is thicker and stronger than other economy covers. The material is water repellent, breathable and UV treated for light outdoor use. There are…
Upgrade To Firmer/Longer Life Urethane Cushions
Includes Washers & Cups
Includes Correct Style Bolts with Castle Nut & Cotter Pin
Same as 3429113 but Includes 2 Additional Spring Cups Used in the Trailing…
340 lbs Rate For Big Block Engines With Standard Suspension & Small Block Engines With Hi-Performance Suspension
Composite monospring restores lost ride height, eliminates leaf spring squeaking, and provides a smooth…
Keep your vehicle dust-free and looking new with our exclusive Ultra Soft Indoor Car Cover. The "Bathrobe" car cover kit is designed for customers that store their cars inside and want to treat their car to the kind of fleece you…
340 lbs For Corvettes With Standard Suspension
Composite monospring restores lost ride height, eliminates leaf spring squeaking, and provides a smooth, comfortable ride without sacrificing performance, and best of all - it never…